Motor vehicle safety inspection equipment
Automotive loading brake test bench
The automotive loading brake test bench is mainly used for testing the braking performance of multi-axle vehicles. It can test the braking force of each axle and the difference in braking force (maximum process difference). With relevant equipment and networked with a computer, it can obtain the ratio of braking force to axle load, the ratio of manual braking force to vehicle weight, and record and print the braking force curves of the left and right wheels and the parking braking force curve. It is suitable for motor vehicle safety performance testing stations, comprehensive motor vehicle performance testing stations, universities and research institutions, and automobile manufacturers. It can perform brake testing on multi-axle vehicles.
TECHNICAL PARAMETERS
|
Project/Modle |
HSJZ-15 |
|
Maximum axle load (t) |
15 |
|
Braking force detection range
(daN) |
0~3900×2 |
|
Drum diameter × length
(mm) |
φ245×1100 |
|
Inner width × outer width of the drum (mm)
|
800×3000 |
|
Roller center distance(mm)
|
467 |
|
Height difference between front and rear rollers (mm)
|
30 |
|
Motor power
|
2×15KW |
|
Rate voltage |
AC 380 |
|
Braking force indication error |
No more than ±3%
|
|
Weighing indication error
|
No more than ±2%
|
|
Gas source pressure
|
0.8Mpa-1.00Mpa |
|
Platform lifting hydraulic station
|
Working pressure 12Mpa
|
Online consultation
Get your customized solution now
Name：
Phone：
Email：
Consulting product：
Remark：
Submit
Immediate consultation